Twist Lock Plunger Pin Catalogue or Specification

Yokelink Twist Lock Plunger Pin is spring-loaded and each pin includes a grease fitting and is zinc-plated for corrosion protection. Install by drilling a hole to accept plunger pin and weld the barrel into place. Twist Lock Plunger Pin is used on applications where a self-locking mechanism is needed. They are commonly used on sling arms, wheel lift arms, dump kits, farm implements, wrecker attachments and more. Locks securely with spring loaded pin and rotating handle. Each pin includes a grease fitting and is zinc-plated for corrosion protection. Pin is ideal for dump kits, farm equipment, wrecker attachments, stabilizer legs, wheel lift arms, and more.

Download

Weld-on Hinges Catalogue or Specification

Yokelink Hinge is a mechanical device that creates a flexible connection between two parts. A hinge allows a component such as door, gate or lid, to rotate or pivot around a fixed point in order to open or close whilst maintaining stability and alignment. Yokelink Welding hinge to be welded on metal swinging doors. To be used in order to open very heavy metal gates, openings or door leaves. Our Bullet Hinges are made from special profile steel for weld-on applications. Esthetic half-round heads and 360°rotation of V-shaped fanges allow for ease of weld-on installation.Brass washer on each hinge permit smooth continuous operation.

Download

Strut Channels Catalogue or Specification

Yokelink Strut channels are versatile and widely used components in Construction and industrial applications. They are metal channels that are used to support, Brace, and connect various components and structures. The channels are typically made of steel, aluminum, or Stainless Steel and come in different sizes and configurations. Strut channels can be used in a wide range of applications, including electrical, plumbing, HVAC, and structural support systems. They are commonly used to create framework or support structures for cable trays, pipes, conduit, and other equipment.

Download

Strut General Fittings Catalogue or Specification

Yokelink External square plate Washers provide a base to lock down screwed rod with a nut and Washer. The flat brackets are used for joining two or three pieces of unistrut channel together forming angles in the same plane. Use to create right angles, tees and crosses. All are hot dipped galvanized. General fittings including Flat Plate Fittings,Angle fittings,Angular,"Z","U",Wing Shape fittings etc... Standard Finish: Zinc-Plated, Available for stainless steel and hot dip galvanized or power coating finish. We also offer Strut Channels, Channel nuts,Bracketry,Cantilever arms,Plain Channel Nut,Rod Hangers, Girder Clips & Cut Studs.

Download

EN 14399 / DIN 6914 / ISO7412 BOLTS

EN 14399 / DIN 6914 / ISO7412 Hex bolts for high-strength structural bolting

Download

ASTM F1554 Anchor Bolt & Anchor Rod

ASTM F1554 Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength

Download

ASTM A449 Bolts

ASTM A449- Standard Specification for Quenched and Temperature Steel Bolts and Studs

Download

ASTM F3125/F3125M High Strength Structural Bolts and Assemblies

Standard Specification for High Strength Structural Bolts and Assemblies. This specification is a consolidation and replacement of four ASTM standards, including: A325, A490, F1852 and F2280

Download

ANSI C135.2 / IEEE Std C135.2 Specification

ANSI C135.2 / IEEE Std C135.2-1999 Standard For Threaded Zinc-Coated Ferrous Strand-Eye Anchor Rods And Nuts For Overhead Line Construction Covers the dimensional and performance requirements for threaded zinc-coated ferrous strand-eye anchor rods and nuts commonly used for overhead line construction.

Download

ANSI C135.1 / IEEE Std C135.1 Specification

ANSI C135.1 / IEEE Std C135.1-1999 Standard For Zinc-Coated Steel Bolts And Nuts For Overhead Line Construction Covers requirements for the carriage bolts, machine bolts, double-arming bolts, double end bolts and nuts used in overhead line construction.

Download

Yokelink Product-Strut Channel Accessories

Yokelink offer a variety of Strut Channel Accessories, Buliding fitting, pipe clamps, brackets, hinges braces and hardware fittings.

Download

Yokelink Product-Poleline Hardware

Yokelink supply a full line of Poleline Hardware for use in the distribution, transmission, substation, OEM and telecommunications market.

Download